Electrical safety in and around the house

!±8± Electrical safety in and around the house

Electrical safety in the home - is crucial, but it's probably something that we give little thought.

If you consider that are reported each year about 6,700 fires with an electrical source, you can see the importance of electrical safety really is. These statistics include fires started by faulty wiring or inadequate. Accidents also cause electric shocks with a cause of death and serious injury. About 43 deaths and 2,900 serious injuries occur fromelectrical failure each year.

We tend to forget that cables, switches, sockets and other devices can, over time, and it is important to be regularly checked and replaced if necessary to be carried by a qualified electrician.

Many people are not aware that the standards of new construction came into force in January 2005, that if you are carrying out electrical work in your home or garden in England and Wales, you must now follow. This is a new area for the constructionRegulations and is part P (electrical safety). These give clear guidelines for the type of work you can do on their own and those of a competent, qualified electrician should be performed. Be aware that you must use a competent person with building codes.

The most important things you should consider are:

It 'important that all electrical work carried out by persons with the necessary knowledge, skills and experience of the kind carried outelectrical work to be done.

You should not even groped the simplest of electrical work, if you have any doubt, have the job. You may have noticed that these days most devices rated accordingly with caps printed with the fuse already installed. This is to stop the newcomer strong to incorrect wiring or device evaluation and to avoid installation Cowboy. Would the number of people who can not be a surprise ignition cablereally!

For the media things even more confusing for the home compared to 2006 to be new is the color scheme is introduced for the wiring.

The colors of the hot and neutral wires in electrical cables ranging from red to brown and black alternating blue. This is now the same as the flexible wires for mobile devices.

From March 31, 2006, all new lines in new colors.

Because the rules were introduced? The most important of these rules is to reduce the number ofDeaths, injuries and fires caused by faulty electrical installations. It is also intended to make it more difficult to stop "cowboy builders" of electrical installations in an unsafe condition.

If you do not follow the rules, you run the risk that:

The electrical installation might not be safe.

They have no trace of their work.

You may have difficulty selling your home if you are not entitled to certificates of electrical safety.

There is the additional risk thatLocal authorities and local building authorities may insist that you put right faulty work. The involvement of you with even more costs.

It 'important to know when to inform the Council of any proposed work power.

You do not need to tell your Building Council local control over the repair, replacement and maintenance. All additional electrical outlets, lighting points or other alterations to existing circuits (except in the kitchen or bathroom, oroutdoors).

However, you must tell them to almost any other job!
If you are unsure, ask your local contractor or local official of the Building Control Council.

Remember - do not try to save money by skimping on electrical installation work. You could end up costing a lot more money in the long run - or even your life! Use an installer registered.

The advantages of using an installer in writing, that the members of systems capable of handling all newRules for you. You will be able to perform any electrical work. They give you a certificate to confirm their work follows the new rules.

You do not need to pay a building control system.

In most cases, you have the option to purchase insurance-backed guarantee for the work.

In the unlikely event of any problems, you have access to a formal complaint if you are not satisfied with the work.

If you need to find a competent person,carry out electrical work, complete the registration below or schemes 'competent person' organizations:

BRE Certification

British Standards Institution (BSI)

ELECSA

The National Association of Professional Inspectors and Testing (Napitia)

NICEIC Certification Services

These rules are designed to ensure that traders who sign up are qualified to do electrical work and a proper complaints procedure.

Remember - always an engineer who isregistered with a competent person scheme described above.

While this article aims to include up to date and accurate information can be considered the article as a guide only. The author would always recommend that you take advice from local independent and professional.